Stems & CartridgesThe faucet valve parts index

Part record

American Standard 57281-07 bibb seat, 1/2 in. x 20

57281-07 is the removable brass seat that the stem washer closes against in American Standard compression faucets. Danco, BrassCraft and Lowe's list it at 1/2 in. x 20 thread and 7/16 in. tall; Larsen lists it at 1/2 in. x 20. One supply house files it under American Standard Colony.

Schematic drawing of an American Standard 57281-07 style bibb seat with a tapered sealing face, a straight 1/2 in. x 20 threaded section and a wrench socket through the center
Schematic, not to scale. It shows only the features named on this page. No bench photo of this part yet.

Specifications

OEM number
57281-07
Type
Removable threaded faucet seat (bibb seat), brass
Thread
1/2 in. x 20 threads per inch
Height
7/16 in., per Danco #44, Lowe's 780100 and Hodesco
Faucets
American Standard Colony (Hodesco); tub and shower faucets (Lowe's 780100 kit)
Aftermarket numbers
Danco #44 (30043E), BrassCraft SC0831X and SCB0831X, Larsen SB-8
Tell among 1/2 in. x 20 seats
Height: 7/16 in. here, 3/8 in. Pfister 970-510, 5/16 in. Sayco

Jump to: confirm it is your part, look-alikes, FourHome replacement.

What it replaces

NumberMakerWhat it is
57281-07American StandardThe OEM seat number printed on the Danco #44, BrassCraft SC0831X, Larsen SB-8 and Lowe's 780100 pages. No American Standard document naming it was found.

Where it goes

Confirm it is your part

  1. It is a short brass insert threaded into the valve body under the stem, with a wrench socket through the center. It stays in the valve when the stem comes out.
  2. Measure across the threads: 1/2 in. A 7/16 in. thread is the Danco #20 American Standard seat. A 9/16 in. thread is the Danco #54 seat.
  3. Count the threads with a pitch gauge: 20 per inch. A 1/2 in. seat that reads 24 is the Sterling 369X style seat (Danco #18).
  4. Measure the height: 7/16 in. Catalogs list the Pfister 970-510 at 3/8 in. and the Sayco 1/2 in. x 20 seat at 5/16 in., so height separates them.
  5. Danco lists its #20 American Standard seat at 13/32 in. tall, close to 7/16 in. Check the thread first: 7/16 in. x 24 on the #20, 1/2 in. x 20 on this one.

Look-alikes

American Standard 7/16 in. x 24 seat (Danco #20)

Why it gets confusedSame brand on the card and nearly the same height, 13/32 in. against 7/16 in.

How to tellHD Supply lists the Danco #20 at 7/16 in. x 24 thread, OEM ref 862-1. The 57281-07 is 1/2 in. x 20. Measure the thread, not the height.

American Standard 9/16 in. x 18 seat (Danco #54)

Why it gets confusedAnother American Standard seat hanging in the same rack.

How to tellDo it Best lists the Danco #54 at 9/16 in. x 18 thread. A thread gauge reads 1/2 in. x 20 on the 57281-07.

Pfister 970-510 seat

Why it gets confusedSame 1/2 in. x 20 thread.

How to tellZoro lists the 970-510 replacement 32102 at 3/8 in. overall height. The 57281-07 is 7/16 in. Same thread, so measure the height.

Sayco 1/2 in. x 20 seat (Danco 30112E)

Why it gets confusedSame 1/2 in. x 20 thread.

How to tellPlumbersStock lists the Danco 30112E Sayco seat at 5/16 in. high. The 57281-07 is 7/16 in., the taller of the two.

Sterling 369X seat (Danco #18)

Why it gets confusedSame 1/2 in. thread diameter.

How to tellHD Supply lists the Danco #18 at 24 threads and 3/8 in. height. The 57281-07 reads 20 on a pitch gauge and stands 7/16 in.

Cross-reference numbers

Numbers other makers and sellers list against this part. The notes say how far each one goes.

MakerNumberNote
Danco#44 / 30043E2 pack; Ace, Zoro and Tundra pages name OEM 57281-07
BrassCraftSC0831X2 pack, names OEM 57281-07
BrassCraftSCB0831X10 pack, sold by Lowe's as model 780100
LarsenSB-8pair; one retailer page names OEM 57281-07, marked discontinued there

Not printed on this page

Where the sources disagree, the figure is left off until it is settled.

Field notes

FourHome replacement

The FourHome replacement for American Standard 57281-07 ships as ten brass seats, 1/2 in. x 20 thread and 7/16 in. tall; a seat wrench, stem washers and thread sealant are not in the pack.

FourHome publishes this site. The button goes to our own listing on Amazon.

Sources

  1. Lowe's, Brass Tub/Shower Faucet Seat Kit, model 780100 (SCB0831X), replaces OEM 57281-07
  2. Hodesco, American Standard 57281-07 faucet seat for Colony
  3. Ace Hardware, Danco #44 faucet seat for American Standard
  4. Zoro, Danco for American Standard 1/2 in.-20 brass faucet seat 9D0030043E
  5. Walmart, BrassCraft SC0831X faucet seat for American Standard, 1/2 x 20
  6. DK Hardware, Larsen SB-8 faucet seat for American Standard, 1/2 x 20
  7. HD Supply, Danco No 20 faucet seat for American Standard
  8. Do it Best, Danco #54 American Standard 9/16 in. x 18 bibb seat
  9. Zoro, Zoro Select seat 32102, OEM 970-510, 10 pack
  10. PlumbersStock, Danco 30112E seat for Sayco
  11. HD Supply, Danco #18 faucet seat for Sterling
  12. FourHome listing on Amazon
  13. Tundra, #44 faucet seat for American Standard 57281-07, 1/2-20, 7/16 in. tall

Catalogs disagree now and then, and makers revise parts without changing the number. Compare the old part before buying. Identify by measurement lists every indexed part near a given length and spline count.