Mixet MS-5AT (MS5AT C) single-lever tub and shower stem
MS5AT C is the 4-1/2" stem on Mixet's parts sheet for single-lever tub and shower valves of the non-pressure balance type, held under a chrome retainer nut. The same sheet lists two other stems for those valves: MS3T, the pre-1968 stem, and the 6-1/4" MS-EXT. Catalogs sell MS5AT C for post-1968 valves.
Schematic, not to scale. It shows only the features named on this page. The lower end is left blank because no source opened describes it. No bench photo of this part yet.
Specifications
OEM number
MS5AT C on Mixet's parts sheet. Catalogs print it MS-5AT, MS5AT and MS-5AT-C
Mixet's name
Mixet 4-1/2" Stem, item 7, stock number SL1350
Type
Single-lever tub and shower stem, hot and cold through one stem
Valves
Mixet non-pressure balance single-lever valves, per Mixet's sheet
Valve era
Post-1968, per Ferguson and Lowe's listings. Mixet lists MS3T as its pre-1968 stem
Held by
Chrome retainer nut with a hex at the outer end (Mixet MSRN C), with three washers on Mixet's drawing
Finish
Brass, chrome and white, per BrassCraft's SLD1350 listing
Controls on the valve
A temperature lever and a separate volume knob, per Mixet's parts sheet
Mixet 4-1/2" Stem, item 7 on Mixet's Non-Pressure Balance Valves sheet. Drawn with the chrome retainer nut and three washers.
MS-5AT, MS5AT, MS-5AT-C
Mixet
The same number as distributors and aftermarket catalogs print it. Ferguson's Mixet-brand part says Replaces #MS5AT; Danco prints MS-5AT-C and HD Supply prints MS5AT-C.
MSRN C
Mixet
Mixet Retainer Nut, item 11. The chrome nut and its washers sold alone, without the stem.
Where it goes
Mixet's parts sheet titled Non-Pressure Balance Valves lists MS5AT C as item 7, the 4-1/2" stem, in the same single-lever valve as Mixet's temperature lever handles and volume control knobs.
Ferguson and Lowe's list this stem for post-1968 valves. Mixet's sheet lists a different stem, MS3T, as its pre-1968 stem.
BrassCraft's SLD1350 listing at Ferguson says it is for non-pressure balance Mixet valves. A Mixet pressure balance valve takes a different stem.
Confirm it is your part
Look at the trim. A Mixet single-lever valve has a temperature lever and a separate round volume knob. Mixet's sheet lists both for this valve.
The stem comes out from under a long chrome retainer nut with a hex at the outer end. Mixet's drawing shows the nut, then three washers, then the stem.
Count the washers behind the nut. Mixet's drawing shows three. Lowe's lists two brass washers and one nylon washer with the carded MXT07 version.
Look for retainer keys. Mixet's installation instructions say pre-1968 stems have retainer keys. Keys on the old stem mean a pre-1968 valve, which Mixet's parts sheet lists with the MS3T stem.
Check the length class. Mixet names this the 4-1/2" stem and names MS-EXT the 6-1/4" stem. Ferguson and BrassCraft both list MS3T at over 6 in. A stem over 6 in. long is not MS5AT C.
Check the valve type. A pressure balance Mixet valve takes MS9AT C, per Home Depot's BrassCraft SLD1154 listing, not this stem.
Why it gets confusedSame valve family and the same chrome retainer nut. Sold side by side as the pre-1968 and post-1968 stems.
How to tellMixet's parts sheet calls MS3T the pre-1968 stem, and Mixet's installation instructions say pre-1968 stems have retainer keys. Ferguson and BrassCraft both list it at over 6 in., the long stem of the two.
Why it gets confusedAlso a non-pressure balance Mixet stem, and HD Supply sells it for valves after 1968.
How to tellMixet names it the 6-1/4" stem. It is the long stem: length, not the date, tells it apart.
Mixet MS9AT C (BrassCraft SLD1154)
Why it gets confusedHome Depot's listing also calls it a 4-1/2 in. Mixet stem with retainer nut.
How to tellHome Depot lists it for pressure balance Mixet faucets. MS5AT C sits on Mixet's Non-Pressure Balance Valves sheet.
Mixet MSRN C retainer nut (BrassCraft SWD0409)
Why it gets confusedThe chrome nut is the part you see first, and it is sold on its own.
How to tellMixet's drawing shows MSRN C as the chrome nut and washers only, with no stem. MS5AT C is the stem with the nut and washers.
Cross-reference numbers
Numbers other makers and sellers list against this part. The notes say how far each one goes.
Maker
Number
Note
BrassCraft
SLD1350
SL1350 on Mixet's own sheet
Danco
88200 (MX-1)
Home Depot: replaces MS-5AT-C
HD Supply
483030
replacement for MS5AT-C
Ferguson
MMS5AT
Mixet brand, replaces MS5AT
Not printed on this page
Where the sources disagree, the figure is left off until it is settled.
A measured overall length and a body diameter. Mixet names it by length and most catalogs agree with that name, but two catalogs give other figures without saying what they measure, so no measured figure is printed.
The handle end: spline count or flat size. No source opened describes it.
Whether this stem goes into a pre-1968 valve. Mixet's sheet lists MS3T for those, but the Mixet instruction sheet Ferguson files with MS5AT tells you to discard pre-1968 retainer keys when fitting the new stem. The page says neither way.
Whether a separate assembly nut and the washers come in the FourHome pack. The FourHome listing text and its photos differ.
Prime-Line MP58045 and other cross-references whose pages do not name MS5AT or MS-5AT-C.
Field notes
Length does not date the valve. HD Supply sells the 6-1/4" MS-EXT for valves after 1968, and Mixet lists MS3T, which Ferguson and BrassCraft list at over 6 in., as the pre-1968 stem. Check for retainer keys and the valve type.
FourHome replacement
The FourHome listing says the replacement ships as one stem with the chrome sleeve; its count of a separate assembly nut and washers is not printed here.
FourHome replacement
Replacement for Mixet MS-5AT Shower Cartridge
Application
Mixet 4-1/2 in. stem (MS5AT C) for non-pressure balance single-lever valves, sold for post-1968 valves
Catalogs disagree now and then, and makers revise parts without changing the number. Compare the old part before buying. Identify by measurement lists every indexed part near a given length and spline count.