This is the short brass seat that threads into the body of a Sayco compression valve, under the stem washer. Danco sells it as #113 (30112E) at 1/2 in. x 20 thread, 5/16 in. tall and 9/16 in. O.D., and gives Sayco 6F (new) as the number it replaces. Danco's hot and cold stems for Sayco 308 and T-308 valves are sold as made for this seat.
Schematic, not to scale. It shows only the features named on this page. No bench photo of this part yet.
Specifications
OEM reference
Sayco 6F (new), per Danco's #113 listing. No Sayco document found
Type
Removable threaded brass seat (bibb seat) for compression stems
Thread
1/2 in. x 20 threads per inch
Height
5/16 in., per Danco #113; Jones Stephens titles B40032 1/2 in. x 20 x 5/16 in.
Outside diameter
9/16 in., per Danco #113
Danco number
#113: 30112E (2 per pack)
Paired stems
Danco hot and cold stems for Sayco 308 and T-308 (from 1968), sold as "for Sayco seat model 113"
The Sayco reference that Ace and Zoro print on the Danco #113 (30112E) seat (DK Hardware prints 6F without old or new): 1/2 in.-20, 9/16 in. O.D., 5/16 in. tall. Danco prints 6F (old) on a different, taller seat (#27).
Where it goes
One hardware store lists Danco's hot and cold stems for Sayco bath faucet models 308 and T-308 (from 1968) as "for Sayco seat model 113", with the seat included.
Lasco sells its 1/2 in. x 20 Sayco seat, SB-42NL, as a lavatory and shower seat. Thrifco's X-42 Sayco seat is listed for a lavatory faucet.
No Sayco parts list was found that names this seat or the faucet models and years that take it.
Confirm it is your part
With the stem out, the seat is the brass ring threaded into the bottom of the valve pocket. It comes out with a seat wrench, not with the stem.
Gauge the thread: 1/2 in. diameter, 20 per inch. A 1/2 in. seat with 24 per inch is the Sterling style (Danco #18). A 5/8 in. x 20 Sayco seat also exists, so check the diameter too.
Measure the height with calipers: 5/16 in. If it reads 3/8 in., stop: that is the Sayco 6F (old) seat, Danco #27, and this seat is the wrong height for it.
Measure the widest point: 9/16 in. Danco gives the same 9/16 in. for its #27 seat, so this figure does not separate the two Sayco seats. Height does.
The Sayco number alone does not settle it. Danco prints 6F against both its #27 and #113 seats, marked old and new.
Look-alikes
Sayco 6F (old) seat, Danco #27 (30026V)
Why it gets confusedSame Sayco number, same 1/2 in. x 20 thread, same 9/16 in. O.D. on HD Supply's page.
How to tellHD Supply lists the #27 at 3/8 in. tall. This seat is 5/16 in. A 1/16 in. difference, so read it on calipers, not by eye.
Pfister 970-510 seat (Zoro Select 32102)
Why it gets confusedSame 1/2 in. thread diameter.
How to tellZoro lists the 970-510 replacement at 3/8 in. overall height, 1/16 in. taller than this seat.
American Standard 57281-07 seat (Lowe's 780100)
Why it gets confusedSame 20 per inch thread and 1/2 in. across the threads.
How to tellLowe's lists it at 7/16 in. high, the tallest of the 1/2 in. x 20 seats here. This seat is 5/16 in.
Sterling 369X seat (Danco #18)
Why it gets confusedSame 1/2 in. diameter and the same 9/16 in. O.D.
How to tellHD Supply lists the #18 at 24 threads and 3/8 in. tall. A pitch gauge reads 20 on the Sayco seat.
Sayco 5/8 in. x 20 seat (Partworks 28614)
Why it gets confusedAlso sold for Sayco faucets, with the same 20 thread count.
How to tellThe thread diameter is 5/8 in., not 1/2 in. Calipers across the threads settle it.
Cross-reference numbers
Numbers other makers and sellers list against this part. The notes say how far each one goes.
Maker
Number
Note
Danco
#113 / 30112E
2 per pack; Ace and Zoro pages name Sayco 6F (new), DK Hardware gives 6F
Jones Stephens
B40032
Titled 1/2 in. x 20 x 5/16 in. faucet seat for Sayco; Zoro sells it in multiples of 10
Lasco
SB-42NL
2 pack, titled Sayco lavatory and shower seat, 1/2 in. x 20; height not stated
Thrifco
X-42 (4400844)
1/2 in.-20 Sayco seat; height not stated
Not printed on this page
Where the sources disagree, the figure is left off until it is settled.
Sayco A003. A Zoro page gives it as the OEM reference for a 1/2 in. x 20 Sayco seat, and HD Supply lists a Sayco chrome seat A003EP-10 at 9/16 in. x 5/16 in. without a thread. Danco gives 6F. No page ties A003 to both the thread and the height.
BrassCraft SC1516X and SC1515X. Both are listed as 1/2 in. x 20 Sayco seats on different pages, and the SC1515X page gives a 3/8 in. length. Neither is printed.
Proplus 2061001LF. HD Supply lists it at 2/7 in. tall and 3/5 in. wide, figures no other source matches.
Lasco X-42PNL, 303074 and 556601LF. No page opened gives their specs or ties them to this seat.
Kitchen faucets and two-handle valves. No outside source names them for this seat.
Wrench socket shape and size. No outside source states it.
Field notes
Danco carries two seats for the same Sayco reference: #27 for 6F (old) at 3/8 in. and #113 for 6F (new) at 5/16 in. Thread and O.D. are the same on both, so the wrong one threads into the same pocket. Only the height on calipers shows which seat came out.
FourHome replacement
The FourHome replacement for the Sayco 1/2 in. x 20 seat ships as ten brass seats, 5/16 in. tall; a seat wrench, stem washers and thread sealant are not in the pack.
FourHome replacement
Replacement for Sayco Bibb Seats, 1/2 in. x 20, 10 Pack
Catalogs disagree now and then, and makers revise parts without changing the number. Compare the old part before buying. Identify by measurement lists every indexed part near a given length and spline count.