Repair kit for the Pfister 910-382 diverter stem: seat, washers and gaskets
This is the wear-parts kit for the Pfister 910-382 center diverter stem, not the stem. BrassCraft lists the 910-382 service parts as a bibb seat, bibb washer, bibb screw, O-ring, bonnet packing and cap thread gasket. The brass stem and its threaded bonnet go back in.
Schematic, not to scale: the 910-382 stem this kit services, labelled with where the kit parts go. The kit has no stem. The lower end is left blank because sources describe the tip differently. No bench photo of this kit yet.
Specifications
Services
Pfister 910-382 center diverter stem, outside bonnet threads. Also carded as 910-3820.
OEM kit number
None found in a Pfister document
Type
Seat and seal kit for a brass compression diverter stem. No stem in it.
BrassCraft service parts for 910-382
SC1312 bibb seat, SC2116 bibb washer, SC0004 bibb screw, SC0093 bonnet packing, SC0262 cap thread gasket, O-ring (no stock number)
Cap thread gasket by stem (BrassCraft)
SC0262: 910-382 and 910-385. SC0208: 910-372. SC0198: 910-374.
BrassCraft's SP-0341 catalog files its ST5324 as the replacement for Pfister 910-382 and lists the seat, washer, screw, packing, cap thread gasket and O-ring as separate service parts. Those are the pieces this kit renews.
The FourHome listing places the kit on the center diverter of Pfister and Price Pfister three-handle tub and shower valves with an external-thread bonnet.
Home Depot sells the genuine 910-382 as a diverter stem with outside bonnet threads, for faucets with a sleeve.
Confirm it is your part
Position. The stem came from behind the center handle of three. The left and right handles take hot and cold stems, and BrassCraft gives those a different cap thread gasket.
Bonnet. Outside threads on the bonnet that came out with the stem match Home Depot's description of 910-382. A center stem without bonnet threads is not a 910-382.
Count what is worn: a bibb seat in the valve body, a flat washer and brass screw on the stem end, an O-ring, the bonnet packing and the cap thread gasket. That is BrassCraft's 910-382 service list.
Seat. Set the old seat beside the new one before it goes in. Retail diverter kits differ: HD Supply lists a 7/16 x 27 seat in the Danco kit, the Lasco kit has no seat, and no source opened prints the thread of this kit's seat.
Stem. The kit has no stem, bonnet or broach. Worn stem threads, a rounded broach or a scored diverter end mean the job needs the stem, not this kit.
Look-alikes
Pfister 910-382 diverter stem
Why it gets confusedSame number in both titles, and FourHome sells both.
How to tellThe stem is the brass part with the 12-point broach and the threaded bonnet. The kit is loose pieces: seat, washers, screw, O-ring, packing and gaskets, with no stem. The stem has its own record.
FourHome 5 piece stem repair kit for Pfister 910-374 and 910-013
Why it gets confusedSame brand, same three-handle valve, sold next to this kit.
How to tellIt is for the side hot and cold stems. BrassCraft gives 910-374 cap thread gasket SC0198, not the diverter's SC0262. This kit is 10 pieces and carries a nylon diverter washer.
Lasco 0-2013 diverter stem kit
Why it gets confusedSold as a Price Pfister tub and shower diverter stem kit.
How to tellOne retailer lists four parts: a 3/8L flat washer, a packing friction washer, a diverter washer and a brass screw. No seat, no O-ring, no cap gaskets.
Danco 124166 stem repair kit
Why it gets confusedTitled Stem Repair Kit for Price Pfister Shower Diverter.
How to tellHome Depot and HD Supply list it for several stems: IDs 61-4, 9H-3,4, 10I-10,11 and 12H-4,5,18. HD Supply lists its seat as 7/16 x 27. Hold the old seat against the new one.
Everbilt 865950 stem repair kit
Why it gets confusedAlso a 10 piece kit for Pfister diverter stems.
How to tellHome Depot names no Pfister part number and does not list the 10 pieces, so the contents cannot be matched piece by piece.
Not printed on this page
Where the sources disagree, the figure is left off until it is settled.
Everbilt 865950, Lasco 0-2013 and Danco 124166 as cross-references. None of their pages names 910-382, and the Lasco and Danco contents differ from this kit.
Seat thread and the size of each piece. The FourHome listing gives none, and the one diverter kit seat size found belongs to a different maker's kit.
Fit on the 910-385 diverter. BrassCraft lists the same seat, washer, screw, packing and cap gasket for 910-385 and 910-382; the FourHome listing says the kit is not for 910-385.
Stem length. Catalogs give different figures for 910-382, so none is printed here or on the stem record.
A Pfister kit number. No Pfister document opened lists a repair kit for 910-382.
Field notes
BrassCraft lists the same seat, bibb washer, screw and bonnet packing for 910-382, 910-385, 910-372 and 910-374. Only the cap thread gasket number changes, so the gasket is where a hot and cold kit falls short on the diverter.
FourHome replacement
The FourHome kit ships 10 pieces: one brass bibb seat with a seat wrench socket, one brass washer screw, one flat stem washer, one O-ring, one bonnet packing, one nylon diverter washer, two cap thread gaskets and two flat sealing washers; no stem, handle or grease.
If the stem itself is worn, the Pfister 910-382 diverter stem record covers the stem, and its look-alikes section links the 910-382 vs 910-374 comparison for telling the center stem from the side stems.
FourHome replacement
Replacement Diverter Stem Repair Kit for Pfister 910-382, 10 Pc
Application
Ten pieces for one 910-382 center diverter stem; no stem
Catalogs disagree now and then, and makers revise parts without changing the number. Compare the old part before buying. Identify by measurement lists every indexed part near a given length and spline count.